User Guide

Wi-Fi Array
Viewing Status on the Wi-Fi Array 135
Network Map
This window offers detailed information about this Array and all neighboring
Arrays, including how the Arrays have been set up within your network.
Figure 71. Network Map
You may sort the rows based on any column that has an active column header,
indicated when the mouse pointer changes to the hand icon . Click Refresh to
update the information at any time. Click Auto Refresh to instruct the Array to
refresh this window automatically.
Content of the Network Map Window
The network map includes the following status information for each Array:
z Array Name: The host name assigned to the Array. To establish the host
name, go to “Express Setup” on page 174.
z Location: The location assigned to the Array. To establish the location
information, go to “Express Setup” on page 174.
z Array OS: The software version running on the Array.
z IP Address: The Array’s IP address. If DHCP is enabled, the Array’s IP
address is assigned by the DHCP server. If DHCP is disabled, you must
assign a static IP address. To enable DHCP or to assign a static IP address
for the Array, go to “Express Setup” on page 174.
Refresh