User Guide

Wi-Fi Array

126 The Web Management Interface

Logging In

Use this procedure to log in to the WMI via your Web browser.

1. Establish a network connection and open your Web browser.

2. Connect to the Wi-Fi Array via its default IP address (10.0.2.1 for both

Gigabit 1 and Gigabit 2 Ethernet ports) or via a DHCP assigned IP

address.

3. To log in to the Array’s Web Management Interface, enter admin when

prompted for a user name and password.

Figure 64. Logging In to the Wi-Fi Array

Applying Configuration Changes

When you have defined all your settings in any WMI configuration window, you

must click on the Apply button for the changes to take effect in the current

session, or click on the Save button to apply changes to this session and write

your changes, so they will be preserved after a reboot.

Character Restrictions

When inputting strings in the WMI (for example, assigning SSIDs, host name,

password, etc.), use only common alphanumeric characters. Do not use any of the

following characters:

&<>' “/ \