User Guide

Wi-Fi Array
Installing the Wi-Fi Array 89
Connecting the Cables—AC Option
This section is for Array models that have a separate AC input. If supplying AC to
the Array directly (not using PoGE), refer to Figure 40 to connect cables.
Otherwise, skip to Connecting the Cables—PoGE Option.
Figure 40. Connecting the Cables
Feed the power and Ethernet cables through the access hole in the tile and the
mounting plate, then connect the cables to the Array. See also, “Wiring
Considerations” on page 84.
z AC power cord—connect to AC source and AC socket on Array.
z Gigabit1 (mandatory)—the Array’s primary data and management port.