User Manual Part 2

Wi-Fi Array
260 Configuring the Wi-Fi Array
Per-SSID Access Control List
This window allows you to enable or disable the use of the per-SSID Access
Control List (ACL), which controls whether a station with a particular MAC
address may associate to this SSID. You may create access control list entries and
delete existing entries, and control the type of list. When finished, click on the
Save button to save your changes.
There is one ACL per SSID, and you may select whether its type is an Allow List
or a Deny List, or whether use of this list is disabled.
There is also a global ACL (see “Access Control List” on page 229). If the same
MAC address is listed in both the global ACL and in an SSID’s ACL, and if either
ACL would deny that station access to that SSID, then access will be denied.
Figure 123. Per-SSID Access Control List
Procedure for Configuring Access Control Lists
1. SSID: Select the SSID whose ACL you wish to manage.
2. Access Control List Type: Select Disabled to disable use of the Access
Control List for this SSID, or select the ACL type — either Allow List or
Deny List. Then click Apply to apply your changes.
• Allow List: Only allows the listed MAC addresses to associate to
the Array. All others are denied.
• Deny List: Denies the listed MAC addresses permission to
associate to the Array. All others are allowed.

In addition to these lists, other authentication methods (for
example, RADIUS) are still enforced for users.