User Manual Part 2

Wi-Fi Array
Configuring the Wi-Fi Array 253
based login, users may be authenticated without using an 802.1x
supplicant. See “Web Page Redirect Configuration Settings” on page 254
for details of WPR usage and configuration.
The lower part of the window contains a few sections of additional settings to
configure for the currently selected SSID, depending on the values chosen for the
settings described above.
 “SSID Limits” on page 253
 “Web Page Redirect Configuration Settings” on page 254
 “WPA Configuration Settings” on page 258
 “RADIUS Configuration Settings” on page 258
SSID Limits
See “Group Limits” on page 266 for a discussion of the interaction of SSID limits
and group limits. To eliminate confusion, we recommend that you configure one
set of limits or the other, but not both.
15. Stations: Enter the maximum number of stations allowed on this SSID.
The default is 1536. This step is optional. Note that the IAPs - Global
Settings window also has a station limit option — Max Station
Association per IAP. If both station limits are set, both will be enforced.
As soon as either limit is reached, no new stations can associate until
some other station has terminated its association.
16. Overall Traffic: Choose Unlimited if you do not want to place a
restriction on the traffic for this SSID, or enter a value in the Packets/Sec
field to force a traffic restriction.
17. Traffic per Station: Choose Unlimited if you do not want to place a
restriction on the traffic per station for this SSID, or enter a value in the
Packets/Sec field to force a traffic restriction.

When using WPR, it is particularly important to adhere to the SSID
naming restrictions detailed in Step 1.