User Manual Part 2

Wi-Fi Array

242 Configuring the Wi-Fi Array

Procedure for Establishing Rogue AP Control

1. Rogue BSSID/SSID: Enter the BSSID, SSID, or manufacturer string to

match for the new rogue control entry. The Match Only radio buttons

specify what to match (e.g., the MAC address, SSID, or manufacturer).

You may use the “*” character as a wildcard to match any string at this

position. For example, 00:0f:7d:* matches any string that starts with

00:0f:7d:. Since Xirrus Arrays start with 00:0f:7d:, this applies the Rogue

Control Type to all Xirrus Arrays.

2. Rogue Control Classification: Enter the classification for the specified

rogue AP(s), either Blocked, Known or Approved.

3. Match Only: Select the match criterion to compare the Rogue BSSID/

SSID string against: BSSID, Manufacturer, or SSID. The BSSID field

contains the MAC address.

4. Click Create to add this rogue AP to the Rogue Control List.

5. Rogue Control List: If you want to edit the control type for a rogue AP,

just click the radio button for the new type for the entry: Blocked, Known

or Approved, then click Apply or Save to apply your change.

6. To delete rogue APs from the list, click their Delete checkboxes, then click

Apply or Save.

7. Click Apply to apply the new settings to this session, or click Save to

apply your changes and make them permanent.