User Manual Part 2

Wi-Fi Array
218 Configuring the Wi-Fi Array
Procedure for Configuring Admin Privileges
1. Privilege Level Names (optional): You may assign a Name to each
Privilege Level. The name may be used to describe the access granted by
this level. By default, levels 0 and 1 are named read-only and read-write,
respectively, and levels 2 through 7 have the same name as their level
number.
2. Privilege Levels: Use this section to assign a Minimum Privilege Level
to selected Configuration Sections as desired. By default, all sections are
assigned level 1. When you select a higher privilege level for a
configuration section, then only administrators who have at least that
privilege level will be able to make configuration changes to that section.
3. You may click Reset All Levels at the bottom left to return all privilege
levels to their default value (level 1).
4. Click Apply to apply modified settings to this session, or click Save to
apply your changes and make them permanent.
See Also
External Radius
Groups
Admin Management
Admin RADIUS
Security
Admin RADIUS
This window allows you to set up authentication of network administrators via
RADIUS. Using RADIUS to control administrator accounts for logging in to
Arrays has these benefits:
 Centralized control of administrator accounts.
 Less effort — you don't have to set up user names and passwords on each
Array; just enter them once on the RADIUS server and then all of the
Arrays can pull from the RADIUS server.