User Manual Part 2

Wi-Fi Array
Configuring the Wi-Fi Array 195
Procedure for Configuring NetFlow
1. Enable NetFlow: Choose Yes to enable NetFlow functionality, or choose
No to disable this feature.
2. NetFlow Collector Host (Domain or IP): If you enabled NetFlow, enter
the domain name or IP address of the collector.
3. NetFlow Collector Port: If you enabled NetFlow, enter the port on the
collector host to which to send data.
Wi-Fi Tag
This window allows you to enable or disable Wi-Fi tag capabilities. When
enabled, the Array listens for and collects information about Wi-Fi RFID tags sent
on the designated channel. These tags are transmitted by specialized tag devices
(for example, AeroScout Tags). A Wi-Fi tagging server (such as AeroScout) then
queries the Array for a report on the tags that it has received. The Wi-Fi tagging
server uses proprietary algorithms to determine locations for devices sending tag
signals.
Figure 98. Wi-Fi Tag
Procedure for Configuring Wi-Fi Tag
1. Enable Wi-Fi Tag: Choose Yes to enable Wi-Fi tag functionality, or choose
No to disable this feature.

Some features, such as Netflow, are only available if the Array’s license
includes the Xirrus Advanced RF Analysis Manager (RAM). If a setting
is unavailable (grayed out), then your license does not support the feature.
See “About Licensing and Upgrades” on page 325.