User Manual Part 2

Wi-Fi Array

Appendices 407

Removing the Access Panel

Use this procedure when you want to remove the system’s access panel. You must

remove this panel whenever you need to service the internal components of the

Array.

1. Disconnect the AC power cord or Ethernet cable supplying power from

the Array.

2. Place the Array face-down on a flat surface. Avoid moving the unit to

reduce the risk of damage (scratching) to the finished enclosure.

3. Remove the screws (3 places) that secure the access panel to the main

body of the Array.

Figure 175. Removing the Access Panel Screws

Screw