User Manual Part 2

Wi-Fi Array
Configuring the Wi-Fi Array 193
a. Adjust Time (hrs:min:sec): If you are not using NTP, check this box if
you want to adjust the current system time. When the box is checked,
you may enter a revised time (hours, minutes, seconds, am/pm) in
the corresponding fields. If you don’t want to adjust the current time,
this box should be left unchecked (default).
b. Adjust Date (month/day/year): If you are not using NTP, check this
box if you want to adjust the current system date. When the box is
checked, you may enter a revised date (month, day and year) in the
corresponding fields. If you don’t want to adjust the current date, this
box should be left unchecked (default).
6. Using an NTP Server
a. NTP Primary Server: If you are using NTP, enter the IP address or
domain name of the NTP server.
Figure 96. Time Settings (NTP Time Enabled)
b. NTP Secondary Server: Enter the IP address or domain name of an
optional secondary NTP server to be used in case the Array is unable
to contact the primary server.
7. Click on the Apply button to apply the new settings to this session, or
click Save to apply your changes and make them permanent.