User Manual Part 2

Wi-Fi Array
192 Configuring the Wi-Fi Array
 “SNMP” on page 199
 “DHCP Server” on page 202
Time Settings (NTP)
This window allows you to manage the Array’s time settings, including
synchronizing the Array’s clock with a universal clock from an NTP (Network
Time Protocol) server. Synchronizing the Array’s clock with an NTP server
ensures that Syslog time-stamping is maintained across all units.
Figure 95. Time Settings (Manual Time)
Procedure for Managing the Time Settings
1. Current Array Date and Time: Shows the current time for your
convenience.
2. Time Zone: Select the time zone you want to use (normally your local
time zone) from the pull-down list.
3. Auto Adjust Daylight Savings: Check this box if you want the system to
adjust for daylight savings automatically, otherwise leave this box
unchecked (default).
4. Use Network Time Protocol: select whether to set time manually or use
NTP to manage system time.
5. Setting Time Manually