User Manual Part 2

Wi-Fi Array
320 Configuring the Wi-Fi Array
2. Select a WMI window for settings that you wish to configure for the
cluster, and proceed to make the desired changes. Click the Apply or
Save button when done with that window to apply the changes to all
Arrays in the cluster.
3. Proceed to any additional pages where you wish to make changes.
4. Some Status and Statistics windows will present information for all
Arrays in the cluster.
5. Click the Save button when done if you wish to save changes on the
cluster member Arrays.
6. Exit: Click the Exit button to the right of the operating cluster to terminate
Cluster Mode. The WMI returns to normal operation — managing only
the Array to which it is connected.
Status and Statistics Windows in Cluster Mode
In Cluster Mode, many of the Status and Statistics windows will display
information for all of the members of the cluster. You can tell whether a window
displays cluster information — if so, it will display the Cluster Name near the top,
as shown in Figure 146.
Figure 146. Viewing Statistics in Cluster Mode
Cluster Name Specify Grouping Exit Cluster Mode