User Manual Part 2

Wi-Fi Array
Configuring the Wi-Fi Array 313
Filter Management
This window allows you to create and manage filters that belong to a selected
filter list, based on the filter criteria you specify.
Figure 140. Filter Management
Note that filtering is secondary to the stateful inspection performed by the
integrated firewall. Traffic for established connections is passed through without
the application of these filtering rules.
Procedure for Managing Filters
1. Filter List: Select the filter list to display and manage on this window. All
of the filters already defined for this list are shown, and you may create
additional filters for this list.
2. New Filter Name: Enter a name for the new filter in the field next to the
Create button, then click on the Create button to create the filter. All new
filters are added to the table of filters at the top of the window. The filter
name must be unique within the list, but it may have the same name as a
Filters are applied in order, from top to bottom.
Click here to change the order.