User Manual Part 2

Wi-Fi Array
312 Configuring the Wi-Fi Array
2. New Filter List Name: Enter a name for the new filter list in this field,
then click on the Create button to create the list. All new filters are
disabled when they are created. The new filter list is added to the Filter
List table in the window. Click on the filter list name, and you will be
taken to the Filter Management window for that filter list.
3. On: Check this box to enable this filter list, or leave it blank to disable the
list. If the list is disabled, you may still add filters to it or modify it, but
none of the filters will be applied to data traffic.
4. Filters: This read-only field displays the number of filters that belong to
this filter list.
5. SSIDs: This read-only field lists the SSIDs that use this filter list.
6. User Groups: This read-only field lists the Groups that use this filter list.
7. Delete: Click this checkbox and then click the Apply or Save button to
delete this filter list.
8. Click on the Apply button to apply your changes to the selected filter, or
click Save to apply your changes and make them permanent.
9. Click a filter list to go to the Filter Management window to create and
manage the filters that belong to this list.