User Manual Part 2

Wi-Fi Array
310 Configuring the Wi-Fi Array
Filters
The Wi-Fi Array’s integrated firewall uses stateful inspection to speed the
decision of whether to allow or deny traffic. Filters are used to define the rules
used for blocking or passing traffic. Filters can also set the VLAN and QoS level
for selected traffic.
User connections managed by the firewall are maintained statefully — once a user
flow is established through the Array, it is recognized and passed through
without application of all defined filtering rules. Stateful inspection runs
automatically on the Array. The rest of this section describes how to view and
manage filters.
Filters are organized in groups, called Filter Lists. A filter list allows you to apply
a uniform set of filters to SSIDs or Groups very easily.
Figure 138. Filters

This feature is only available if the Array’s license includes the Xirrus
Advanced RF Security Manager (RSM). If a setting is unavailable
(grayed out), then your license does not support the feature. Please see
“About Licensing and Upgrades” on page 325.
Orange arrow 
expands/collapses display