User Manual Part 2

Wi-Fi Array
300 Configuring the Wi-Fi Array
Arrays that have been detected, to determine whether to stagger the start
time for the procedure slightly. Thus, nearby Arrays will not run auto
channel at the same time. This prevents Arrays from interfering with each
other’s channel assignments.
Click Factory Defaults to instruct the Array to return all IAPs to their
factory preset channels, as shown in the table below.
Click Auto Configure to perform auto channel configuration
immediately, without first negotiating with any nearby Arrays. This
option is faster than Auto Negotiate and Configure. This allows you to
manually perform auto channel without waiting, and may be used when
you know that no other nearby Arrays are configuring their channels. If
multiple Arrays are configuring channels at the same time, use the Auto
Negotiate option to be ensure that multiple Arrays don't select the same
channels.
Click Auto Negotiate & Configure to instruct the Array to determine the
best channel allocation settings for each IAP and select the channel
automatically, based on changes in the environment. The Array will first
negotiate with other nearby Arrays to see if the start time needs to be
staggered slightly.
Factory Preset Channels (US)
for all models
IAP
16-Radio
Models
12-Radio
Models
8-Radio
Models
4-Radio
Models
abg(n)11111
abg(n)2 mon mon mon mon
abg(n)311111111
abg(n)46666
a(n)1363640 -