Manual Part 2

Wireless Array
206 Configuring the Wireless Array
VLAN Management
This window allows you to assign and configure VLANs. After creating a new
VLAN (added to the list of VLANs), you can modify the configuration
parameters of an existing VLAN or delete a selected VLAN. For ArrayOS 6.6 and
later releases, you may create up to 64 VLANs (up to 32 on the XR-500 Series and
on the XR-620).
Figure 122. VLAN Management

The Wireless Array supports dynamic VLAN assignments specified by
RADIUS policy settings. When RADIUS sends these assignments, the
Array dynamically assigns wireless stations to VLANs as requested.
VLAN tags on traffic are passed through the Array (i.e., VLAN tags are
not stripped). Once a station has been dynamically moved to a new
VLAN, it will be shown in the Stations window as a member of the new
VLAN. (Figure 68 on page 123)
It is critical to configure all VLANs to be used on the Array, even those
that will be dynamically assigned.