Manual Part 2

Wireless Array
Configuring the Wireless Array 265
11. Encryption: Choose the encryption that will be required — specific to this
SSID — either None, WEP, WPA, WPA2 or WPA-Both. The None option
provides no security and is not recommended; WPA2 provides the best
Wi-Fi security.
Each SSID supports only one encryption type at a time (except that WPA
and WPA2 are both supported on an SSID if you select WPA-Both). If you
need to support other encryption types, you must define additional
SSIDs. The encryption used with WPA or WPA2 is selected in “Global
Settings” on page 236. For an overview of the security options, see
“Security Planning” on page 50 and “Understanding Security” on
page 214.
12. Global: Check this box if you want this SSID to use the security settings
established at the global level (see “Global Settings” on page 236). Clear
this box if you want the settings established here to take precedence.
.
Figure 146. SSID Management—Encryption, Authentication, Accounting
Set Encryption
Configure Radius, Accounting