Manual Part 2

Wireless Array
Configuring the Wireless Array 361
WDS Client Links
This window allows you to set up a maximum of four WDS client links.
Figure 176. WDS Client Links
Procedure for Setting Up WDS Client Links
WDS Client Link Settings:
1. Host Link Stations: Check the Allow checkbox to instruct the Array to
allow stations to associate to IAPs on a host Array that participates in a
WDS link. The WDS host IAP will send beacons announcing its
availability to wireless clients. This is disabled by default.

WDS is not available for Arrays or Access Points featuring 802.11ac IAPs.

Once an IAP has been selected to act as a WDS client link, no other
association will be allowed on that IAP. However, wireless associations will
be allowed on the WDS host side of the WDS session.