Manual Part 2

Wireless Array
Configuring the Wireless Array 299
15. Station Timeout Period: Specify a time (in seconds) in this field to define
the timeout period for station associations.
16. Max Station Association per Array: This option allows you to define
how many station associations are allowed per Array, or enter unlimited.
Note that the Max Station Association per IAP limit (below) may not be
exceeded, so entering unlimited, in practice, will stop at the per-IAP
limit. If you have an unlicensed Array, this value is set to 1, which simply
allows you to test the ability to connect to the Array.
17. Max Station Association per IAP: This defines how many station
associations are allowed per IAP. The maximum is 240 (up to 128 on the
XR-500 and XR-600 Series). Note that the SSIDs > SSID Management
window also has a station limit option — Station Limit, and the windows
for Global Settings .11an and Global Settings .11bgn also have Max
Stations settings. If multiple station limits are set, all will be enforced. As
soon as any limit is reached, no new stations can associate until some
other station has terminated its association.
18. Block Inter-Station Traffic: This option allows you to block or allow
traffic between wireless clients that are associated to the Array. Choose
either Yes (to block traffic) or No (to allow traffic).
19. Allow Over Air Management: Choose Yes to enable management of the
Array via the IAPs, or choose No (recommended) to disable this feature.