Manual Part 2

Wireless Array
Configuring the Wireless Array 287
IAPs
This status-only window summarizes the status of the Integrated Access Point
(radios). For each IAP, it shows whether it is up or down, the channel and
wireless mode, the antenna that it is currently using, its cell size and transmit and
receive power, how many users (stations) are currently associated to it, whether a
WDS link distance has been set for it, and its BSSID (MAC address).
Figure 155. IAPs
The Channel Mode column displays some status information that is not found
elsewhere: the source of a channel setting. (Figure 156) If you set a channel
manually (via IAP Settings), it will be listed as manual. If an autochannel
operation changed a channel, then it is labeled as auto. If the channel is set to the
current factory default setting, the source will be default. This column also shows
whether the channel selection is locked, or whether the IAP was automatically
switched to this channel because the Array detected the signature of radar in
operation on a conflicting channel (see also, Step 8 on page 297).
Figure 156. Source of Channel Setting
There are no configuration options in this window, but if you are experiencing
problems or simply reviewing the IAP assignments, you may print this window
for your records. Click any IAP name to open the associated configuration page.