Manual Part 2

Wireless Array
Configuring the Wireless Array 277
Procedure for Configuring Access Control Lists
1. SSID: Select the line for the SSID whose ACL you wish to manage. Click
the line to hide or expand (display) the list.
2. Access Control List Type: Select Disabled to disable use of the Access
Control List for this SSID, or select the ACL type — either Allow or Deny.
• Allow: Only allows the listed MAC addresses to associate to the
Array. All others are denied. The plus symbol appears
before the SSID name for an allow list.
• Deny List: Denies the listed MAC addresses permission to
associate to the Array. All others are allowed. The minus symbol
appears before the SSID name for a deny list.
• Disabled: A red dot appears before the SSID name for a
disabled list. A green dot appears before the SSID name for
an allow or deny list.
3. MAC Address: If you want to add a MAC address to the ACL for the
selected SSID, enter the new MAC address. You may use a wildcard (*)
for one or more digits to match a range of addresses. Delete: You may
delete selected MAC addresses from this list by clicking their Delete
buttons .
4. Click the Save button if you wish to make your changes permanent.

In addition to these lists, other authentication methods (for
example, RADIUS) are still enforced for users.