XO Bevies High Density Access Points Quick Installation Guide For XD4 Models XM Series High Density Caress Paints {APs} are a new class of ere touch APs within the Cirrus wireless portfolio. With four directional 802.1lac radios, a powerful integrated controller, application-level intelligence, automated provisioning, and optional cloud management, the APs deliver robust wireless connectivity in areas of medium to high user density: The XD4-130 has four 2x3 Wave 1 802.
XI Series High Density Access Points Workstation with a Web browser to configure the AF via the Cirrus Management System or directly via the AP's Windows Management Interface (WM. A 7716” mut driver to attach the mounting plate to the bracket or lips. (See “Install Mounting Hardware and AP” on page 3) Note that you cannot use old T-bar clips from XIN or XS APs with the XDH4 Series. For a locked installation, supply a zip-IE, small lock, or other locking hardware.
XI Series High Density Access Points Connect Cables and Install AP Connect the cable that carries power and data fo GIGAPIXEL (shown in red). If you use a Cirrus-supplied injector, its CONNECT LED should light {for TOW and higher injectors, blinks). If power is being properly supplied, the APs LED will light and then commence blinking in their rotating boot pattern. A second data connection may be plugged into GIG (optional).
XT Series High Densely Access Points Using the Reset Button The reset button returns the AP to factory default settings while rebooting. It is located on the bottom of the unit. Lie the reset button as follows: © Unplug the cable from fhe GIG Poe port. © Press the reef button all the way (there should be a faint click} and hold it. Plug the cable back in and continue to keep the button pressed for 100 seconds This triggers the factory default reset during the boot process.
Direct Mounting Tern plate Nl an i res morn email info © 518 Kes, re ar seine is Ch WLR oi
Wireless Access Pols Appendix C: Notices {XD and XE300/600 Series Only) rd Compliance bf as, Warming go Be Chick Stallone G sed Dumpling wo forensically for shoulder products, ok predict seed ford Worming, and Compliance information for all other Als, Blotches (UNTO 2c XHA00H Toad sor Modeler” nonage 550, This appendix contains the following information: linen won # “Notices” on page 581 # “BU Directive SEC Comparative Indoctrination” on page 546 # “Compliance Information (Won-ELF ore page 553 # *Sally Warn
Wireless Access Plato installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there fs no guarantee that interference will not scour In a particular installation.
Wireless Access Point RE exposure requirements, this device must be installed in a location where the gardenias of the device will have a minimum distance of at least 3 om {12 inches) from all persons, except that ADZE models must have a minima distance of at least 20 env (8 inches) from all persons. Using higher gain termagants and types of antennas not certified for use with this product is not allowed. The device shall wot ba co-located with another transmitter.
Wireless Excess Point WERE Compliance Natural resources were used in the production of this equipment. This equipment may contain hazardous substances that could impact the health of the environment, in order to avoid harm to the environment and consumption of natural resources, we encourage vos Bo use appropriate duke-back systems when disposing of this equipment. The appropriate take-back systems will reuse or reveler most of the materials of this equipment in Avery that will not harm the environment.
Wireless Access Point National Restrictions in the majority of the EU and other European countries, the 2.4 GHz and 5 GHz bands have base made available for the use of Wireless LAN, The following fable provides an overview of the regulatory requirements in general that are applicable for the 2.4 GHz and § CHz bands: TH-2A83.5 184 X Xo SAGA-5350 = 200 X N/A B470-5725% 00 X Xx *Dynamic frequency selection and Transmit Power Control is voted in these Frequency band.
Wireless Access Plato Antennas “Fhe Cirrus Wireless AP employs integrated antennas that cannot be ravened and which are not user accessible. Nevertheless, as regulatory Hits are not the same throughout the EU, users may need to adjust the conducted power sifting for the ratio to meet the EIRE lvi ts applicable in their country or region.
Wi fess Vanessa Loin Dilatation of Conformity KR-526 Medicament # LO2DI074Z X-60 Dict amen # THO2CES008 X-520; Colette Cert #0 ROPRIXRI24003 This telecommunication equipment conforms fo NT technical requirement. Safety Warnings ! sm ani Mothers, Wan amd ar Fhe KY and XREF Series only, For offer models, see the nodes of she This Appendix on Beginning of this spending. Read all user documentation before powering this device. All Mirrors interconnected equipment should be contained indoors.