Instruction Manual

Running Light & Turn Signal Wiring
FOR 1116-0200 & 1116-0201 LED HEDLED™
INSTRUCTIONS
12450 Whittier Blvd. Whittier Ca. 90602
[phone] Fax: [phone]
www.riveraprimoinc.com
Left Turn
Signal
Right Turn
Signal
Black/Ground
Red/12V +
FOR TURN SIGNALS
1. Aach red 12V+ to 12V turn signal
switched feed for le and
right turn signal.
2. Aach black ground wire to a good
metallic grounding surface.
3. Plug in the mang connectors securely
with the connectors that come aached
to the headlight.
FOR RUNNING LIGHTS
1. Aach both le and right red 12V+ wires
together and then to 12V+ switched feed.
2. Aach both black ground wires to a good
metallic grounding surface.
1116-0200
Mang Connector
3 Terminal
OE Connector
Scan with your smart
phone to access
www.riveraprimoinc.com
3. Plug In Mang Connectors.
2. Aach red + posive wires to
turn signal switched feed
1. Aach black ground wire to a
good metallic grounding surface.
FOR HIGH & LOW BEAMS
1. Plug in the terminal OE connector
into the mang connector located
on the 1116-0200 head light.
1108-0027