Instructions / Assembly

ASSEMBLY INSTRUCTIONS
1. Carefully layout all parts in a line on a smooth surface.
2. Loose the screws from the bottom and take out the lamp holder base.
3. Insert 1XAA battery into the slot of clock movement, ensuring the correct polarization
4. Install two blubs into the sockets
5. Set the correct time by gently and slowly turning the adjustable knob at the clock movement.
6. Lock the screws at the bottom. Insert the plug into wall receptacle and then enjoy the clock.
CAUTION - Refer to the wattage caution label located near the lamp holder for the maximum
wattage-do not exceed the wattage.
WARNING - Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle.
Note: 1. The above diagram illustrates the installation of your new luminaire. This is a representative
drawing and is not intended to match the style of your luminaire.
2. This stained glass product has been protected with mineral oil as part of the finishing process.
Please use a soft dry cloth to remove any excess oil.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with
an extension cord unless plug can be fully inserted. Do not alter the plug.
MADE IN CHINA