Instructions / Assembly

ASSEMBLY INSTRUCTIONS
1. Carefully layout all the parts in a line on a
smooth surface.
2. Place the shade through the socket, then
screw the butterfly shade into base carefully
to secure.
3. Install Bulb (NOT INCLUDED)
Caution: Refer to the wattage caution
label located near the lamp holder for
recommended maximum wattage, do not
exceed recommended wattage.
4. Insert plug into wall receptacle.
Warning: Do not attempt to replace the
bulb while the lamp is plugged into a wall
receptacle.
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to
reduce the risk of electric shock. This plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit it, contact a qualified electrician. Never
use with an extension cord unless plug can be fully inserted. Do not alter the plug.
Note: This stained glass product has been protected with mineral oil as part of the finishing
process. Please use a soft dry cloth to remove any excess oil.
Note: The diagram illustrates the installation of your new luminaire. This is a representative drawing
and is not intended to match the style of your luminaire.
WARNING
CALIFORNIA RESIDENTS PROPOSITION 65
This product contains lead, a chemical known to the state of California to cause cancer and
birth defects or other reproductive harm. Do not place the product in your mouth. Wash your
hands after handling this product.
MADE IN CHINA