Installation Guide

10089005 A 05-2021
Installation Guide
for ConMet Digital Products
Page 13 of 37
3.4.4. Tractor - Gateway Mounting
Using the proper plastic panel pry tools, identify a mounting location for the gateway under the front dash
area that provides enough space to fully reassemble the dash back to its OEM condition.
The preferred mounting location is typically near power and ignition circuits and away from any moving parts.
It should never be secured to serviceable panels or in an area that is surrounded by metal as the gateway
needs a clear path to the sky for optimal performance (figure 10). Areas such as crash bars, component
bracketing and air ducts are suitable mounting locations for the device. The mounting location should also
provide adequate space for cable routing and wire management.
Secure the gateway in any orientation with the cable ties to a surface that will have minimal movement (figure
11). You may use foam tape to position the gateway before applying cable ties for easier mounting, but
always secure the gateway with cable ties or another mechanical method, as foam tape adhesive can be
impacted by temperature and age.
Figure 10: Clear View of Sky Figure 11: Mechanical Mounting
Method
There are several mounting locations that can be used in the cab area of a tractor (figure 12). Although a
constant 12v supply can be found in most of these locations, you may be limited due to the availability of a
switched power source or the availability of space for the device and/or wiring.