CN762/CN763 The Right Angle™ Can Opener CN762 CN763 Owner’s Guide READ AND SAVE THESE INSTRUCTIONS
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not immerse cord, plug or motor unit in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning. 5. Avoid contacting moving parts. 6.
This appliance is for HOUSEHOLD USE ONLY. No user-serviceable parts inside. Power Unit never needs lubrication. Do not attempt to service this product. Do not immerse base in water or other liquid. HOW TO OPEN CANS 1. Plug cord into 120 volt, AC outlet. piercing 2. Raise piercing lever enough to wedge can between cutting blade lever and feed wheel as shown. 3. Press lever down all the way to pierce lid and start rim of cutting action.
HOW TO SHARPEN KNIVES Do not attempt to sharpen hollow ground blades or those with serrated edges. 1. Be sure knife is clean and free of grease. 2. Place heel of knife into the guide slot located on the back of the can opener. Lightly draw the blade towards you, applying a slight downward pressure. Repeat this procedure four to five times to put on a “factory sharp” edge. HOW TO CLEAN BLADE ASSEMBLY Never submerge can opener in water. 1. Unplug cord. 2. Wipe can opener with a damp cloth.
