User manual

9
D Power On / LED displays
Switch on the SSC mini4 using the rocker switch on the front of the equipment.
The green CONNECT LED glows and signals that the equipment is ready for operation.
The SSC mini4 initialises keyboard and mouse. The yellow ACTIVE LED flashes. When initialisation is
complete, this LED glows constantly. If the yellow ACTIVE LED does not stop flashing, check whether the
connecting cable for the keyboard and mouse is plugged in correctly.
The green CONNECT SERVER LED displays if a computer that is switched on has been detected at each port.
If four active computers are connected, all 4 LED's glow constantly.
The yellow ACTIVE SERVER LED's indicate the channel or server currently selected.
E Scope of delivery
1. Switch
SSC mini4 Art.Nr. 7551.000
2. Server connection
cable
PS/2-Server Server side => HD 15 Video, 6 pin mini DIN keyboard and
mouse
(7551.1x0)
(incl. adapter for serial mouse and AT keyboard)
Order separately for
each channel
SSC side MDR-20 plug
4. Documentation 1 Installation and operating manual
F Technical data
Interfaces:
Monitor:
- Output HD 15 pin SUB socket
Signals transmitted: analogue colour graphics signals
R, G, B, H sync, V sync,
sync in green, composite sync.
Keyboard/
Mouse :
- Input 2 x 6 pin mini DIN (PS/2) plug
- Output 2 x 6 pin mini DIN (PS/2) socket
Resolution:
max. 1600 x 1200 (250 MHz)
Switching:
With keyboard entry (hotkey) scan / skip function
Power supply:
This switch is optional intended to be supplied by a listed direct plug-in power unit marked “Class 2“ and rated
5Vdc / 300 – 500mA.
Casing:
(W x H x D)
Desktop: 443 x 43,8 x 245 mm
19" installation: 19“ x 1 unit height x 245 mm