User manual

6
B 3 Function mode
The Function mode is called up with the CTRL + NUM key combination
(CTRL = Hotkey, NUM = Select Key).
All 4 SERVER ACTIVE LED's on the front side of the equipment as well as the NUM CAPS and SCROLL LOCK
LED's on the keyboard flash quickly to indicate the active function mode.
If you do not want to carry out a function, exit the mode with ESC.
All LED's stop flashing and the LED's standard display appears again.
This mode offers two ranges of functions that can be initiated by pressing another key (action key) in addition to
the hotkey combination of CTRL and NUM.
The function mode consists of two ranges:
· Configuration
· Functions
B 3.1 Configuration
Configuration offers you the following options:
What Activating the mode Action key
Resetting to default SSC mini4
settings
CTRL + NUM D
Hotkey change
(Alternatives)
CTRL + NUM CTRL Left ALT Right ALT SHIFT
WIN
Select key change
(Alternatives)
CTRL + NUM 1 = 1 – 4
F1 = F1 - F4
NUM 1 = NUM 1 – NUM 4
A = A - D
Default settings:
By carrying out this action you reset the hotkey and select key to the factory settings:
CTRL + NUM => Call up the function mode
CTRL + (1 - 4) => Keyboard combination for server selection
Hotkey change
If there is a conflict between the hotkeys of the software you use and those of the SSC mini4, you can alter
these here. You can choose between the 5 alternatives listed below.
Note:
If you alter that hotkey this also applies when calling up the function mode.
Example:
Change to WIN => Activating the function mode with WIN and NUM
Select key change
Just as for the hotkey the second key for switching servers can be changed. The groups named above can be
selected by entering the first character of the group.
Note:
Alterations made here have no effect on the second key for calling up the function mode.