User manual

11
Horizontal mounting of SSC at 482,6mm (19“) Profile tracks
1) Mount capture nut Pos.6 (e.g .2092.500) at 482,6mm mounting bracket Pos.1.
2) Mount Rack-Mount-Angle Pos.2 with ovalhead countersunk screw M4 Pos.7 at SSC-case Pos.3
3) Mount SSC Pos.3 with Rack-Mount-Angle Pos.2 with Lens screw M5 Pos.4 (2099.500) and washer Pos.5
at 482,6mm (19“) mounting bracket Pos.1 in Pos.6
Additional information
· Environmental temperature (Rack): 0°C – 45°C (32°F – 113°F)
· The rear side of the unit should possibly not be loaded with the attached cable. The attached cables to the
SSC should be mechanically connected to the rack, lest the weight of the cables have an effect to the unit.
The maximum mechanical load of the SSC in the Rack mustn't exceed 12 kg.
· As the switch is a “Class III” device the grounding of the casing is not necessary.
· If an external power supply should be necessary, the SSC mini4 is optional intended to be supplied by a
listed Direct Plug-In Power Unit marked “Class 2” and rated + 5Vdc/300 – 500mA.
Horizontal mounting