mini4 DK 7551.000 mini4 User Manual Drawing number: Language: Status: Date: A 26784 00 DK 75 english V1 22.05.
NOTES CAUTION TO AVOID THE RISK OF SHOCK HAZARD, DO NOT OPEN THE EQUIPMENT OR REMOVE PROTECTIVE COVERS. IF THE EQUIPMENT REQUIRES SERVICING PLEASE INFORM OUR TECHNICAL SUPPORT TEAM. READ THE INSTRUCTION MANUAL CAREFULLY, BEFORE YOU OPERATE THE EQUIPMENT. FOLLOW ALL WARNINGS AND OPERATING INSTRUCTIONS, EITHER ON THE EQUIPMENT OR IN THE INSTRUCTION MANUAL. STORE THE INSTRUCTION MANUAL IN A SAFE PLACE. POWER SUPPLY: THIS PRODUCT IS OPTIONAL INTENDED TO BE SUPPLIED BY A AND RATED + 5 VDC / 300 - 500 MA.
A Description………………………………………………………………………………….. P. 4 A1 A2 A3 A4 A5 General……………………………………………………………………………………. P. 4 Larger applications……………………………………………………………………….. P. 4 Functions………………………………………………………………………………….. P. 4 System requirements……………………………………………………………………. P. 5 Power supply……………………………………………………………………………… P. 5 B Operation…………………………………………………………………………………….. P. 5 B1 B2 B3 B 3.1 B 3.2 B 3.3 Delivery condition / default settings…………………………………………………….. P. 5 Switching………………………………………………………………………………….. P.
A Description A 1 General The Rittal SSC Switches can be divided into two basic equipment groups, the mini4 Server Switch and the multi4, multi8 and multi16 Server Switches. This manual describes the SSC mini4. The SSC mini4 fulfils the requirements that are made of a complete server switch and has all of the basic functions of a modern switching system. The mini4 enables you to control 4 computers from one workstation.
A 4 System requirements The SSC mini4 does not have any particular requirements in terms of server software or hardware, due to its design as a hardware solution. Please ensure that the monitor at the switch supports the resolutions and sync modes of all the computers connected to the switch. A 5 Power supply The SSC mini4 is power supplied over the connection cable 7551.1x0 to the Server. The connection cables are available in lengths of 1 m (7551.110) – 9 m (7551.190).
B 3 Function mode The Function mode is called up with the CTRL + NUM key combination (CTRL = Hotkey, NUM = Select Key). All 4 SERVER ACTIVE LED's on the front side of the equipment as well as the NUM CAPS and SCROLL LOCK LED's on the keyboard flash quickly to indicate the active function mode. If you do not want to carry out a function, exit the mode with ESC. All LED's stop flashing and the LED's standard display appears again.
B 3.2 Functions The range of functions offers you the following options: What Activating the mode Action key AutoScan (Automatic scanning of all channels) CTRL + NUM N CTRL + NUM P CTRL + NUM M CTRL + NUM R AutoSkip (Automatic scanning of all active channels) ReINIT Mouse (Win 3.11, Win 95,Unix) (not for IntelliMouse) ReSET Mouse (all others) AutoScan: All of the channels on the SSC mini4 are queried regardless if a server is connected or switched on.
B 3.3 Ending the function mode If you do not want to carry out a function, exit the mode with ESC. The mode is closed automatically after you have initiated the desired function i.e. after you have released the corresponding action key. All LED's stop flashing and the LED's standard display appears again. C Installation Switch off all connected servers. Pull out the monitor, keyboard and mouse cables from the server. Using a CPU connecting cable (Rittal no. 7551.
D Power On / LED displays Switch on the SSC mini4 using the rocker switch on the front of the equipment. The green CONNECT LED glows and signals that the equipment is ready for operation. The SSC mini4 initialises keyboard and mouse. The yellow ACTIVE LED flashes. When initialisation is complete, this LED glows constantly. If the yellow ACTIVE LED does not stop flashing, check whether the connecting cable for the keyboard and mouse is plugged in correctly.
G Rack mounting Mounting instruction SSC mini4; Art.Nr.: 7551.000 Basically, the mounting of the SSC-Switches can be carried out in two different ways. Vertical (hanging) installation as well as horizontal installation is possible by mounting the enclosed standard angle. Following, the necessary steps are described for the corresponding installation. Vertical hanging mounting Rack-mounting of the SSC (hanging installation) 1) Mount Depth stays Pos.2 with tapping screw Pos. 9 at rack frame Pos.
Horizontal mounting Horizontal mounting of SSC at 482,6mm (19“) Profile tracks 1) Mount capture nut Pos.6 (e.g .2092.500) at 482,6mm mounting bracket Pos.1. 2) Mount Rack-Mount-Angle Pos.2 with ovalhead countersunk screw M4 Pos.7 at SSC-case Pos.3 3) Mount SSC Pos.3 with Rack-Mount-Angle Pos.2 with Lens screw M5 Pos.4 (2099.500) and washer Pos.5 at 482,6mm (19“) mounting bracket Pos.1 in Pos.
EC-Declaration of Conformity The product herewith complies with the requirements of the legal regulations 89/336/EEC about the electromagnetic tolerance, changed RL 91/236/EEC, 92/31/EEC, Examining basis: EN 55022 Kl.B EN 61000-3-2 EN 61000-3-3 EN 55024 (1998) (1995 + A1, A2, A14) (1995) (1998) Emission Emission, Net harmonic waves Emission, Patcher Noise immunity of the 73/23/EEC Guideline regarding Electrical operating supplies for the use within determined Tension limits, changed RL 93/68/EEC.
Rittal GmbH & Co. KG * P.O Box 1662 * D-35726 Herborn Telefon (02772) 505-0 * Telefax (02772) 505-2319 eMail: Info@rittal.de * Internet: http://www.rittal.
