User manual

2009.3.25 V1.12

Item Description

LOCK/ZOOM

Press LOCK/ZOOM to select entire screen as detection area.

MUTE / PIP

Press MUTE/PIP to deselect entire screen as detection area.

STATUS

Switch between “select” and “deselect” for cursor-dragging function

ENTER

Press to function on the selected area with assigned status

Press to save the setup and leave

ESC

Press to cancel the setup and leave

4-2.2 SENSOR SETUP

Item Description

Sensor Detection

Check the box to Enable/Disable sensor detection for all channels.

Sensor Popup

Check the box to Enable/Disable popup screen function for all

channels. When Sensor is detected in LIVE mode, the detected

channel image will pop up in full screen display.

Sensor Polarity

Click or press ▼ to select between HIGH, LOW voltage for

triggering sensor detection or OFF to turn off polarity for each

channel

Low Polarity：Sensor has not been triggered. When connected,

sensor will be turned on..

High Polarity：Sensor has been triggered. When connected, sensor

status will be turned off..

Off ：Sensor is deactivated, and will not be turned on/off.

Note

：

4CH DVR will display 4 channels and 8CH DVR will display 8 channels.