Owner`s manual

PROGRAMMING THE RADIO
-----------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------
Ritron RCCR Clean Cab User Manual 28
Ritron, Inc. (800)-USA-1-USA [e-mail]
Custom Frequencies
The Ritron RCCR radio can be
programmed with up to 100 custom
frequencies for operation on analog
channels that are not included in the
AAR Tables. Custom frequency
programming also specifies the
operating bandwidth. Once entered,
the custom programmed frequencies
are available for Home Channel
programming only. Custom
frequencies cannot be accessed via
the CHAN button, but only through
inclusion on a Home Channel that is
accessed with the HOME button.
Home Channel Screen with
Custom Frequency List displayed
Pressing the Custom Frequencies
tab located at the top left of the screen
will display the Custom Frequencies
list and allow you to add and edit radio
channels 500-599.
NOTE: Only Custom Frequencies that have been programmed will be available for programming on a
Home Channel. If a Custom Frequency is required it should be programmed prior to inclusion
on a Home Channel.
To program a Custom Frequency:
1. Press the Custom Frequencies tab to display the scrolling list of Custom Frequencies 500-599.
2. Select the Custom Frequency to be programmed from the scrolling Custom Frequencies list.
3. The frequency and bandwidth for the selected Custom Frequency will be displayed on the left
side of the screen.
4. Enter the frequency and bandwidth for the selected Custom Frequency. Data will appear on the
Custom Frequencies list as it is entered.
5. Any Custom Frequency may be removed from the list by first selecting the Custom Frequency,
and then pressing the Delete button on the left side of the screen.
6. If a programming error is detected (i.e. invalid Custom Frequency) a message box will alert you
to the error and allow you to go back and correct the entry.