Owner`s manual

PROGRAMMING THE RADIO
-----------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------
Ritron RCCR Clean Cab User Manual 24
Ritron, Inc. (800)-USA-1-USA ritron@ritron.com
Keypad
Most front panel keypad buttons can
be disabled by un-checking the
associated box.
Keypad Settings Screen
Channel
If the CHAN button is disabled all
channel entries must be made via
pre-programmed Home Channels
using the HOME button.
Home
If the Home button is disabled all
channel entries must be made using
the CHAN button and are limited to
AAR channels.
Tone
If the Tone button is disabled the radio will be unable to send Single-Tone dispatch tones unless they
have been pre-programmed into a Home channel, where they can be sent with the DISP button.
DTMF
If the DTMF button is disabled the radio will be unable to send DTMF dispatch sequences unless they
have been pre-programmed into a Home channel, where they can be sent with the DISP button. This
will not prevent DTMF tones from being sent using the numeric keypad.
Keypad (all)
If the numeric keypad is disabled it will not send DTMF tones when pressed. The keypad can still be
used to enter channels via the CHAN or HOME buttons, or dispatch sequences using the DTMF or
TONE buttons.
“*” Key
If the “*” key is disabled it will not send DTMF tones when pressed. It will still be available for entering
DTMF sequences using the DTMF button.
“#” Key
If the “#” key is disabled it will not send DTMF tones when pressed. It will still be available for entering
DTMF sequences using the DTMF button and for “Revert to Last TX-RX Channel Pair” feature using
the HOME button.