Owner`s manual

PROGRAMMING THE RADIO
-----------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------
Ritron RCCR Clean Cab User Manual 22
Ritron, Inc. (800)-USA-1-USA [e-mail]
Timers
Timers Setting Screen
DTMF/Tone Timers (mS)
Minimum Duration
Sets the minimum time a DTMF
Tone is sent with the numeric
keypad, regardless of how long the
key is pressed.
Maximum Duration
Sets the maximum time a DTMF
Tone is sent with the numeric
keypad, regardless of how long the
key is pressed.
Pre-Time Duration
Sets the delay before a DTMF Tone is sent after a key on the numeric keypad is pressed. This
allows time for the transmitter to power up and the receiving radios to lock onto the signal.
Hang Time Duration
Sets the length of time the transmitter will remain active after a DTMF Tone is sent using the
numeric keypad. This allows time for multiple digit entries without the transmitter dropping between
digits.
Dispatch Timers (mS)
Individual Tone Duration
Sets the length of time each DTMF or Single-Tone is sent when using the DISP button to send
dispatch tones. For some models this selection will be dimmed and unavailable.
Inter-Tone Interval
This sets the delay between digits when a DTMF sequence is sent using the DISP button. For
some models this selection will be dimmed and unavailable.
Other Timers
TX Timeout Timer (sec.)
When checked, the transmitter cannot continuously transmit for a period of time greater than the
programmed time. The TX Timeout Timer can be set for 1-255 seconds.
Keypad Entry Timer (mS)
Sets the maximum length of time allowed between digits when making keypad entries.