Owner`s manual

PROGRAMMING THE RADIO
-----------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------------
Ritron RCCR Clean Cab User Manual 18
Ritron, Inc. (800)-USA-1-USA [e-mail]
Print Home Channel Data
You can print out a pre-formatted list of all Home Channels contained in the radio programming or in a
Radio Definition File. This list will detail the custom programming of all Home Channels available on
the radio.
To print a list of all Home Channel programming:
1. Read the radio or open a Radio Definition File.
2. From the F
ile menu, select the Print Home Channel Data menu item.
3. The Print dialog box will appear. The default printer as defined in the Windows printer set-up of
your computer will be automatically selected.
4. The report will always detail the radio’s programming as it appears on the Home Channels
list. To
be sure the report reflects the actual radio’s programming, be sure to R
ead Radio or Program
Radio just before printing the report.
Read Radio
1. With the PC/Radio cable assembly connected to the computer and the radio, turn the radio on.
2. From the R
adio menu, select the Read Radio menu item.
3. The programmer will “ping” the radio to establish
communications. If the programmer does not see a radio the
No Radio! message box will appear. Be sure the cable is
connected, the correct COM Port is selected and the radio is o
The
n.
4. programmer will read the radio and fill all screens with the
5. ” to indicate it has re-started to normal operating mode after the radio’s
6. mation on the various screens.
radio’s programmed information. A communications status box
will appear at the bottom of the screen while the programmer is
reading the radio.
The radio will “beep
“No Radio!” Message Box
programming has been read.
Review the programming infor
Radio Pull-down Menu
Communications Status Box