User's Guide

023
025
026
031
032
036
043
047
051
053
054
065
071
072
073
074
114
115
116
122
Table #6: Digital Interference
Eliminator Programmable DQC Codes
Code Numbers
125
131
132
134
143
145
152
155
156
162
165
172
174
205
212
223
225
226
243
244
245
246
251
252
255
261
263
265
266
271
274
306
311
315
325
331
332
343
346
351
356
364
365
371
411
412
413
423
431
432
445
446
452
454
455
462
464
465
466
503
506
516
523
532
546
565
606
612
624
627
631
632
645
654
662
664
703
712
723
731
732
734
743
754
Table #5: Interference Eliminator
Programmable QC Tone Codes
Code Numbers
-- NONE
01 67.0
02 71.9
03 74.4
04 77.0
05 79.7
06 82.5
07 85.4
08 88.5
09 91.5
10 94.8
11 97.4
12 100.0
13 103.5
14 107.2
15 110.9
16 114.8
17 118.8
18 123.0
19 127.3
20 131.8
21 136.5
22 141.3
23 146.2
24 151.4
25 156.7
26 162.2
27 167.9
28 173.8
29 179.9
30 186.2
31 192.8
32 203.5
33 210.7
34 218.1
35 225.7
36 233.6
37 241.8
38 250.3
39 69.4
40 159.8
41 165.5
42 171.3
43 177.3
44 No Tone
45 183.5
46 189.9
47 196.6
48 199.5
49 206.5
50 229.1
51 254.1
52 71.0
53 198.0
54 202.7
NOTES:
11. 12.
Radio-Wide Settings
How To Program Radio-Wide Settings
The following list of settings can be programmed on a Radio-Wide basis. These settings
will uniformly affect radio operation on all channels.
Setting Description of Setting
[VOX Level] Select VOX Level. 0 to 15, Higher number = Lower level of audio required
to key radio transmitter. Ex:15 = whisper trigger. Must also program
channel for VOX operation. See page 8.
[Squelch] Select Squelch Level. 0 to15, Higher number = decreases receiver
sensitivity. With higher number the radio will hear only the strongest,
closest signals.
[Emergency] Factory Default = [ON] and feature is by factory default assigned to
Orange Key. Can turn feature OFF or ON. If ON, must also assign this
feature to one of the Programmable Function Button. See page 13.
[F1 Key] Factory Default = [TX Power]. Allows access to one specic feature.
See page 13.
[F2 Key] Factory Default = [2T Send]. Allows access to one specic feature.
See page 13.
[F3 Key] Factory Default = [Scan]. Allows access to one specic feature.
See page 13.
[Alert] Factory Default = [On]. Select ON for keypad tones when button is pressed.
Icon will be displayed when ON. Keypad Tones OFF allows silent operation.
[Earphone] Select ON if earphone only is used. When earphone only is connected to
radio, microphone on radio will be active when PTT is pressed.
[Weather] Factory Default = [W7]. Select [None] or choose from
VHF models only
7 National Weather Broadcast RX frequencies. Choose [None] to turn
feature OFF. Go to http://www.nws.noaa.gov/nwr/station_listing to nd
frequency of NOAA Weather Broadcast for your area.
Step 1. PRESS & HOLD the MONITOR button and turn radio ON. Radio will sound
triple beep, then [Program ] will ash on the display for 3 sec. [VOX Level]
will appear rst on display.
Step 2. Use buttons to scroll to one of the Radio- Wide features. e.g. [VOX Level] ,
[Squelch], [Emergency], [F1 Key] , [F2 Key], [F3 Key], [Alert], [Earphone],
or [Weather] (VHF only).
Step 3. Press for the current setting of the selected Radio-Wide feature.
Step 4. Use buttons to scroll sub-list setting options such as; [1-15] Level Settings;
ON or OFF Setting; or individual Key function options.
Step 5. Press button to SAVE the sub-list setting selection. Display will then return to
selected Radio-Wide feature,
Step 6. To program another Radio-Wide setting repeat Steps 2 - 5 or...
Step 7. To return to normal operation turn radio OFF and then ON.