User's Manual

6.5.4 SUMMARY
The summary page summarizes the information shown on the other three pages and, in addition,
includes the model and serial number of the unit.
6.5.5 RESTORE EEPROM
This selection is used to load a previously saved radio configuration file to the radio connected to
the programmer. This is of benefit when a number of radios are to set to the same frequencies
and with the same switch settings. There are three options for this page, but none will copy the
deviation and balance settings since these are unique to each radio, even if the actual deviation
of a set of radios is identical. The top selection allows all settable parameters, including power
levels and squelch settings to be read. The second selection does not read in the power levels
and squelch in case these have already been set in the recipient radio. The last selection is for
someone who has a configuration file from a DTX-165-RR-SIG and want to load it into another.
Older radio parameters are converted and presented such that the audio levels should be the
same. Note that the RF power levels and squelch levels cannot be converted and must be set on
the new radio by hand.
6.5.6 SAVING A CONFIGURATION
Upon exiting the programmer via the exit button, the user will be presented with a box which
allows the saving of the current configuration. This is useful if a number of other radios are to be
programmed with the same frequencies and settings. If one does not wish to save the current
configuration, the cancel icon should be selected. Also, if changes to the radio have been made
via the programmer and the radio has not been updated, the user will be prompted to update the
radio.