User's Manual

Carrier Detect On (dBm)-Sets the RF signal level in dBm such that the carrier detect pin will go active
and the output audio, if squelch is selected, will go unmute.
Carrier Detect Off (dBm)-Sets the RF signal level in dBm such that the carrier detect pin will go inactive
and the output audio, if squelch is selected, will be muted.
Note: The Carrier Detect On level must be set to be higher (less negative) than the Carrier Detect Off
level.
5.7 SUMMARY TAB PAGE
The summary page summarizes all of the selections from the previous pages and is shown below: