User's Manual

________________________________________________________________________________________________________________________________
For assistance, call RITRON at 800-872-1872, or go to www.ritron.com
4
Operating the RQA-1B/4B ........................................................
When any of the buttons are
pressed the RQA-1B/4B will
send a code to the Quick
Talk™, which in turn
decodes the code and
begins broadcasting an
associated pre-recorded
voice message.
The RQA-1B/4B will light
the LED associated with the
button pressed, and will
remain lit while the RQA-
1B/4B is transmitting. If a
button is pressed and held
for more than 5 seconds the
LED will blink and a “Call
Cleared” code will be
transmitted.
1. Press a button to initiate a message.
2. The LED for that button lights while the button is pressed, and remains lit
while the RQA-1B/4B is transmitting.
3. A code is sent to the Quick Talk™ when the button is released.
4. The Quick Talk™ receives the code and broadcasts the associated pre-
recorded message on a schedule programmed into the RQT Quick
Talk™.
5. Press and hold a button for 5 seconds.
6. The LED begins to blink.
7. A “Call Cleared” code is sent to the Quick Talk™ when the button is
released.
8. RQT Quick Talk™ broadcasts a “Call Cleared” message and stops the
broadcast schedule.
RQA-1B/4B Battery Replacement .............................................
The RQA-1B/4B utilizes a standard CR123A lithium cylindrical cell.
Depending on usage, it can provide up to 3 years of operation.
Access for battery replacement is accomplished by:
1. Removing the 4 corner screws on the front of the RQA-1B/4B
2. Carefully separating the case halves.
3. Move the case front toward the bottom of the RQA-1B/4B as shown.
The case front and case back are connected with a flex cable. Do not
place strain on the flex cable connecting the case front to the case back.
4. Replace the battery. Be careful to observe battery polarity.
5. Reposition the case halves and secure with the four corner screws.
There may be the risk of explosion if the battery is replaced by the wrong
type. Replace it with the same type CR123A lithium cell battery by installing
as shown. Although the battery holder is constructed to discourage incorrect
installation, be careful to observe polarity.
CARRY
OUT
PRICE
CHECK
OFFICE
SECURITY
RQ
A
-1B RQ
A
-4B
with Button pressed with Button 1 pressed
RQA-1B/4B case front
CR123A battery
RQA-1B
/
4B case back
Flex cable
Corner screws (x4)