User's Manual

Antennas
• Install antennas taking into account the recommended minimum lateral distances in Table 1. These
antenna installation guidelines are limited to antennas with appropriate ground planes. The antenna
installation should additionally be in accordance with:
a.) The requirements of the antenna manufacturer/supplier.
b.) Instructions in this manual including minimum antenna cable lengths.
c.) Antennas other than those shown in Table 1 must be tested with the High Power DTX module
for RF exposure compliance in the environment in which it is to be used per the FCC’s OET
Bulletin 65, Edition 97-01 or Industry Canada RSS-102.
Use only a unity gain, quarterwave antenna or equivalent antenna per the frequency range for the device as
specified in Table 1. Unauthorized antennas, modifications, or attachments could damage the radio and
may violate FCC regulations.
Antennas for this transmitter must not be co-located or operated in conjunction with any other antenna or
transmitter. All information herein pertains to the antenna not co-located to other antennas or transmitters.
Approved Accessories
• This radio has been tested and meets the FCC RF exposure guidelines when used with the Ritron
accessories supplied or designated for this product. Use of other accessories may not ensure compliance
with the FCC’s RF exposure guidelines, and may violate FCC regulations.
• For a list of Ritron approved accessories see this user manual, or visit the following website which lists
approved accessories: www.ritron,com
Contact Information:
For additional information on exposure requirements or other information, contact Ritron at (317) 846-
1201 or at www.ritron.com.