User's Manual

This selection is used to load a previously saved radio configuration file to the radio connected to the
programmer. This is of benefit when a number of radios are to set to the same frequencies and with the
same switch settings. There are three options for this page, but none will copy the deviation and balance
settings since these are unique to each radio, even if the actual deviation of a set of radios is identical. The
top selection allows all settable parameters, including power levels and squelch settings to be read. The
second selection does not read in the power levels and squelch in case these have already been set in the
recipient radio. The last selection is for someone who has a configuration file from a series DTX-X54 and
want to load it into the series DTX-X60. Older radio parameters are converted and presented such that the
audio levels should be the same. Note that the RF power levels and squelch levels cannot be converted and
must be set on the new radio by hand.
6.5.6 SAVING A CONFIGURATION
Upon exiting the programmer via the exit button, the user will be presented with a box which allows the
saving of the current configuration. This is useful if a number of other radios are to be programmed with
the same frequencies and settings. If one does not wish to save the current configuration, the cancel icon
should be selected. Also, if changes to the radio have been made via the programmer and the radio has not
been updated, the user will be prompted to update the radio.