User guide

Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com
J Series Audio Accessories
Ritron offers a wide range of audio accessories and headsets to help customize your J Series radio for your application. All J Series
audio accessories include a durable, injection molded strain relief. The strain relief keeps the audio accessory rmly attached to the
J Series radio during use and attaches to the radio using 2 Phillips head screws (provided).
1
2
3
5
6
1. To attach audio accessory to the J Series radio- rst remove the Phillips head screw holding the rubber dust cover in place. (see
diagram below).
2. Remove the Phillips head screw on the inside bottom of the dust cover area.
3. Remove inner foam gasket.
4. Place these items in a secure place for future possible use.
5. Attach audio accessory to the J Series radio. (see diagram for proper position of strain relief). Cord leading to the headset or
speaker mic of the accessory must be directed toward the top of the radio.
6. Do NOT over-tighten or apply excessive force when securing Phillips heads screws. Snug top and bottom screws down to the
molded strain relief.
7