Owner`s manual

1 Series OUTPOST
®
Wireless Callbox Installation Instructions
Have questions? Call 800-USA-1-USA (800-872-1872) or visit our website at www.ritron.com
7
F IG : 3 XT C ALLBOX A SSEMBLY .............................................................
• Do not remove the foam Antenna Locator. The foam Antenna Locator is used to position the antenna for optimum
performance. The antenna should be routed in the slot on Antenna Locator, along the inside of the XT case as shown.
The tip of the antenna should not come in contact with any of the connecting cables.
2-Conducto
r
Interface Cable
Captive Plastic
Case Screws
(4 Corners) RF Mating
Connectors
Battery Mating
Connectors
On/PTT Switch
Front Plate
(Bottom Edge)
Threaded Inserts for
Front Plate
Internal Antenna
Battery Holder with
D-Cell Batteries Installed
Charge
Jumpe
r
On/PTT
Connecto
r
+12 VDC Input
Conne
c
tor
Cables must be
routed to the side
of internal plastic
case assembly.
Foam
A
ntenna
Locator*
XT Callbox 2-Wire Interface Cable
Wire Description
Red External 12 VDC “+” input
Black External 12 VDC “-” input