Quick Start Manual

PG 6
PG 5
4 Attach Unit
Position (optional) wall plate over
junction box.
Align the 6-32 captive screws with
the threaded holes in the junction
box.

Screw the wall unit to the junction
box.
RED
TO LOAD
TO LINE
BLACK
STAT
CAUTION HIGH VOLTAGE!
DISCONNECT POWER SUPPLY 
BEFORE SERVICING
5 Install Batteries
The 8045 requires 2AA batteries.
On the control unit, Switch MODE
switch to OFF.

Install 2 AA alkaline batteries according
to the polarity noted in the compartment.
DO NOT USE Rechargeable Batteries.
Caution: The thermostat will go "off" if
the batteries die. This exposes your
house to unexpected heat or cold and
should be avoided.

NOTE: Replace the batteries when the
red LOW battery LED indicator blinks or
once a year.
AA
AA
Note: Do not reattach
control unit until batteries
have been inserted.