User Manual

UPPER SUPPORT
LOWER SUPPORT
COIL SPRING
F
I
R
E
S
T
O
N
E
C
O
I
L
R
I
T
E
A
I
R
H
E
L
P
E
R
S
P
R
I
N
G
S
AIR HELPER SPRING
“A”-ARM
Note: Lubricate the hole in the
“A”-arm with a soap solution
before inserting the air spring.
FRONT OF VEHICLE
PASSENGER’S SIDE
RECOMMENDED OPERATING PRESSURES
1/2 TON VEHICLES 4 - 45 PSI
3/4 TON VEHICLES 10 - 60 PSI
GM P-30 10,000 LB. - 15,000 LB. GVWR 40 - 70 PSI
GM P-30 16,000 LB. GVWR AND UP 60 - 90 PSI
23-8500 07-12
DESCRIPTION QTY.
AIR SPRING 2
SUPPORTS 4
18' AIR LINE 1
NYLON TIE 6
CLIP 2
3/8" -16 X FLANGED LOCK NUT 2
PUSH-TO-CONNECT INFLATION VALVE 2
ELBOW FITTING 2
5/16" FLAT WASHER 4
THERMAL SLEEVE 2
PARTS LIST
READ INSTALLATION INSTRUCTIONS
IN ITS ENTIRETY BEFORE INSTALLING
YOUR COIL-RITE KIT
WARNING
Do not inate this assembly when it is
unrestricted. The assembly must be
restricted by a coil spring. Do not inate
beyond recommended operating pressures
for your specic vehicle. Improper use or
over ination may cause property damage or
severe personal injury.
FIRESTONE INDUSTRIAL PRODUCTS
CARMEL, INDIANA, USA
4100
FIGURE “A”