User`s guide
Functions for Master-Making
Cutting the Top Margin of the Original and Printing [Top Margin]
89
Cutting the Top Margin of the Original and
Printing
[Top Margin]
You can cut the top portion of the margin to between 0 to 99 mm (0.0" to 3.9") and make a master.
This feature enables you to skip the Registration marks
*
on the original and print on the finish-sized paper without any
of these marks.
* About the Registration Mark
In the field of commercial printing, it is normal to print on paper that is larger than the finished size and then cut down to
the finished size afterwards. The symbol that indicates the position to cut in this event is known as the registration mark.
Important!:
• When you are setting the “Size”, magnify/reduce using the area that skips the set value.
• Do not use “Auto Reproduction Size”.
• This function cannot be used with “Multi-Up Print” or “2 Up”.
1
Place an original.
Place the original face down on the Glass Platen.
Align center on the top edge, and close Platen
Cover. )p.43
2
Touch [Top Margin] on the Func-
tions Screen.
3
Touch [ON].
4
Touch or to specify the cut
width.
You can set from 0 to 99 mm (0.0" to 3.9").
Note:
• Print Quantity Keys can also be used to enter a value.
5
Touch [OK].
Returns to the Functions screen. “Top Margin”
setting is updated.
Basic Selections Functions Admin.
Ready to Make Master
P
.
Reservation
ADF Semi-Auto
Preview
Max. Scan
Storage Memory
Overlay
Top Margin
Binding Margin
2/4
Ready to Make Master
Basic Selections Functions Admin.
2/4
P
.
Cancel OK
Top Margin
(Numeric keypad is available for input)
The top margin of
originals can be cut
by a specified range
OFF
ON
mm
0
(0-99)
Ready to Make Master
Basic Selections Functions Admin.
2/4
P
.
Cancel OK
Top Margin
(Numeric keypad is available for input)
The top margin of
originals can be cut
by a specified range
OFF
ON
mm
0
(0-99)