User`s guide

Functions for Master-Making
Laying out continuous originals on one sheet of paper [Layout]
85
8
Configure print functions.
Set various functions as needed.
9
Press the key.
Scanning of the 1st page of the original starts.
10
Scan all originals and make a mas-
ter.
When you set the original on the Glass Platen,
replace the original and repeat steps 8 and 9.
Repeat scanning until the set number of images
have been scanned.
If the original has less pages than the set number
of pages, touch Î [Yes] after all of the original
has been scanned. The unscanned part becomes
a blank.
When original scanning is complete, a master is
made and the Printing Basic Screen is displayed.
Note:
• The original is laid out in the scanned order.
• If you want to cancel the layout setting after set-
ting the number of images, perform step 2 to
display the Layout screen. Touch [OFF] and
then [OK].
READY
A4
Line
Black
Page (A4)
Basic Selections Functions Admin.
Contrast
Auto
Size Paper
Idle
Multi-Up
Print
D-Feed
Check
Info
Page No.4
Ready to scan data Layout