User`s guide

Functions for Master-Making

Laying out continuous originals on one sheet of paper [Layout]

Set the original and print paper.

Place the original on the Glass Platen or in the

optional ADF unit.

To place the original, see )p.43.

Important!:

• Be careful with the orientation of the original.

• Make sure to set the printing paper in the orien-

tation shown in the figure below (the long side

points in the direction of transfer).

Touch [Layout] on the Functions

screen.

Select the page size to use.

Touch the button corresponding to the size of the

original and touch [Next>].

The reproduction size is automatically set and the

Layout screen is displayed.

Touch the button for the number of

images to set.

Touch the button for the number of images to be

laid out and touch [Next>].

Important!:

• Check if the orientation of the originals has

been set in the direction determined for the set

number of images.

Note:

• To cancel the Layout setting, touch [Cancel].

Set the orientation of characters of

the original.

Select [Align Top] or [Align Side] for the orienta-

tion of characters on the original seen from the

touch panel side.

Touch the layout order button to set.

Touch [OK].

“Layout” is set and the Functions screen appears.

Paper output direction

Ready to Make Master